If you need to remove and replace your roof, ensure that you do it right – not investing enough finances or efforts can lead to a damaged roof again within 10 years. For affordable and quality roof replacement services, there is a Roof 101 branch in all major cities and states. The following how to replace a roof guide is relevant to wood shake damage and roof replacement:
Tools Required for Roof Replacement
- Shakes
- Work Gloves
- Roofing Nails
- Safety Rope
- Hammer
- Slates ripper
- Hack saw/blade saw
- Pry Bar
How to Replace a Roof Instructions
- Remove all damaged shakes and those in the layer above them; do not remove shakes in more than one area at a time, as this can be dangerous. Do so by lifting the bottom of the shake, pulling or cutting off old nails, cutting under nails, and puling and wiggling out once nails are free.
- Center of sheathing boards should be placed equal to the distance of the exposure. Use existing non-damaged shakes as a guide.
- Spacing between adjacent shakes should be minimum 3/8 inches, and maximum 5/8 inches. Side lap should be no less than 1 1/2 inches between joints in adjacent courses.
- Install 2 proper nails at 45 degree angle at the butt of covering diverse.
- Drive shake up 1/2 inch covering nail heads, by using wood block against shake butt to reduce splitting.
